The fuse for my blower [COLOR=blue ! important][COLOR=blue ! important]motor[/COLOR][/COLOR] melted damaging the fuse box. Apparently this happens due to a faulty blower motor, so I replaced the blower motor and resistor. Now I need to install an external fuse holder for the blower motor fuse. I spliced the green/brown wire going to the fuse box to the external fuse holder, but am not sure where to connect the other wire. I attached it to a screw on the under side of the fuse box, but that caused the blower to work even with the car off. Does anyone have any information on how to wire this up? Thanks.