Injector flow rate Q's

[Henna Red]

As it says, flow rates... M50 vs M42.

If in fact they are any different. May make a little bit more of a punch with a 3.5fpr at WOT in the little m42

[AdamF 88iS]

M50s flow more than M42s. M42 injectors are the same as M30.

[Henna Red]

M50s flow more than M42s. M42 injectors are the same as M30.

okay thanks, numbers would be nice tho...

and not all m30s are the same as m42's.. just 535's. 533 and 528 injectors are low ohm injectors.

unless of course m50's and m42's are low ohm injectors

[AdamF 88iS]

No, they are high, you're right it's just the later M30s that are the same.

I don't remember numbers off the top of my head, somebody here will chime in.

[Stu]

M42's are 13-14#/hr I believe, M50's are 17.5#/hr.

[m42technic]

M42's are 13-14#/hr I believe, M50's are 17.5#/hr.

M42's have 16.2 lb/hr injectors.

[Mystikal]

M50s flow more than M42s. M42 injectors are the same as M30.

Adam, M30 and M50/S50 injectors are 185cc/min, or 17.6lb/hr.

Stu, you must be mistaken, if they were 14lbs the car wouldn't make stock power.

I'd say 16.2lbs seems correct.