As when i get to 3rd gear and press down on the gas pedal the car studders, check engine light comes on and as i get off it cuts out. This continues into 4th an 5th gear. Is it a govern on speed or a bad MAF
-
sigpic -
What fault code(s) is stored in the DME?The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, AL -
How do i find out the faults code< with one of those code readers on turnermotorsportsigpicComment
-
search e30 "fault codes", or e30 "stomp test", either here or in google. you will find instructions on how to read your DME's codes from the check engine light. no code readers necessary.Comment
-
id say AFM or fuel injectors form my experience.harry/harout
Comment
-
fuel filter?sigpicComment
-
Got it thankssigpicComment
-
fault code was purge valvesigpicComment
-
shouldnt cause that problem i dont think.
I would have guessed a throttle switchYour signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Originally posted by TimKninjaComment
-
1st and 2nd revs out till 6900 but 3 4 5 it holds me backsigpicComment
-
Check plug wire connections, measure plug gap, etc.
Ich gehöre nicht zur Baader-Meinhof Gruppe
Originally posted by Top Gear
Every time you buy a car with DSC/ESC, Jesus kills a baby seal. With a kitten.
Comment
-
Once again... What fault codes are stored in the DME. They will probably provide a clue as to the cause of the loss of power.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, ALComment
-
Check ur fuel pressure
Comment
-
jlevie the code of purge valve is no longer the culprit i drove the car just now and checked the code again i got the code 1261 which is fuel pump relay control. would that be it?sigpicComment
-
1261 - Fuel Pump Relay Control code indicates break or short circuit associated with fuel pump relay. Test for proper signal on number 3 pin on DME. It can also mean that output stage of DME is faulty (Motronic version 1.3 only)sigpicComment
Comment