When i re-connect the battery terminal...

[BlkE30v]

When i re-connect the battery terminal the condenser fan turns on and stays on?..i really don't know whats the problem my car has been sitting in my garage and i haven't driven it. If anybody knows what the solution or the reason for this please let me know...

[CabrioPunk]

AC on?

[Ceeker]

When i re-connect the battery terminal the condenser fan turns on and stays on?..i really don't know whats the problem my car has been sitting in my garage and i haven't driven it. If anybody knows what the solution or the reason for this please let me know...

Well its obvious that it's getting direct power. so either your switch is faulty or something else its the thermoswitch on the rad. First make sure your a/c switch is depressed. If this doesn't change things change the switch to see if that turns it off. The thermo sensor sends a signal to the aux fan to come on after the a/c switch is depressed and is regulated by the rad temp. they all have a 2 speed - high and low. Unless I am mistaken and I've just been smoking too much crack!

[jlevie]

Either something is wrong with the car's wiring or relay K1 or K6 is shorted. If the ignition is off, it doesn't matter what state the A/C button is in. K1 & K6 coil power is only available when the ignition is on.

[BlkE30v]

Well its obvious that it's getting direct power. so either your switch is faulty or something else its the thermoswitch on the rad. First make sure your a/c switch is depressed. If this doesn't change things change the switch to see if that turns it off. The thermo sensor sends a signal to the aux fan to come on after the a/c switch is depressed and is regulated by the rad temp. they all have a 2 speed - high and low. Unless I am mistaken and I've just been smoking too much crack!

thanks for the info

Either something is wrong with the car's wiring or relay K1 or K6 is shorted. If the ignition is off, it doesn't matter what state the A/C button is in. K1 & K6 coil power is only available when the ignition is on.

im gonna check the k1 and k6 relay and see if i find the problem thanks for the info ill get back to you on the results

[BlkE30v]

alright so i took out the k6 relay and the fan turned off, switched it with another relay and it stayed off so i guess you were right the relay went bad thanks for the info..