My exhaust manifold simply will not bolt on all the way after getting a new head. Like it's not that the gasket is leaking, I just can't, even after breaking some studs and replacing with bolts, get it to sit flush against the head. Any tips?
-
Originally posted by TSIOEM+ -
Are the exhaust manifolds disconnected from the down pipe? If they are it should be trivial to attach the manifolds to the head. If they aren't, the exhaust may have shifted when you pulled the head. The fix for that will be to remove the exhaust and put everything back together starting at the head.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, AL -
yeah either this or did you check that the gasket is lined up?Originally posted by jlevie View PostComment
-
You're exhaust manifold flange could be warped?
Thad.Comment
-
Got it. There was a really thin awkward small piece of exhaust gasket on the stud that i didn't catch before...such a dumb mistake.Originally posted by TSIOEM+Comment
-
Yeah thats pretty dumb but look on the bright side, you prob wont do that again.At least right away.Lorin
Originally posted by slammin.e28Comment
Comment