Wanted: SMT6 Maps & info

[ryan_george]

I've got the Siemens MAF and SMT6 coming in the mail, so I thought I'd get started learning the tuning software.
Does anybody have any maps that they'd like to share? I've never tuned before, and it'd be pretty valuable to see how others managed.
The engine is a mostly stock m20b25 (un-chipped). The only "mods" are m50 injectors and hot-air-intake.
Also if you'd like to share your experiences with tuning the smt6, please do!
As far as wiring it goes, all I really need is to hook up the AFM signal and crank sensor? Can I hook up the 02 sensor as well to monitor it?

Thanks in advance.

[fabianyee]

every car is different on the mappings. but what u can do is to dyno tune the car...
the MAF shud be running +10 / +11 on fuel throughout... a short cut is to recalibrate the fuel map on one of the tabpage. By default, it's set to ZERO. move it to 10 and u'll be fine...

btw, sometimes u feel the power surge but the dyno chart shows otherwise... cos our butt is sensing for 'kicks'.. proper tuning gives u smooth power delivery

[ryan_george]

every car is different on the mappings. but what u can do is to dyno tune the car...
the MAF shud be running +10 / +11 on fuel throughout... a short cut is to recalibrate the fuel map on one of the tabpage. By default, it's set to ZERO. move it to 10 and u'll be fine...

btw, sometimes u feel the power surge but the dyno chart shows otherwise... cos our butt is sensing for 'kicks'.. proper tuning gives u smooth power delivery

Yeah I know tuning with a dyno would be the best, but I don't have the resources for that.

I'll just spend a good amount of time logging info from the AFM, then comparing it with results from the MAF.