What Terminals For Connector?

[AndrewBird]

What terminals do you use in the 3 pin connector shown here (#2)?

http://www.realoem.com/bmw/showparts...27&hg=12&fg=31

Is it #18 shown here?

http://www.realoem.com/bmw/showparts...29&hg=61&fg=15

Thanks.

[bimmerteck]

What terminals do you use in the 3 pin connector shown here (#2)?

http://www.realoem.com/bmw/showparts...27&hg=12&fg=31

Is it #18 shown here?

http://www.realoem.com/bmw/showparts...29&hg=61&fg=15

Thanks.

If it an amp connector like an m50 TPS connector it should be #14 IIRC. I'll go pull one and double check for you though.

[Jand3rson]

Hey man, if you have a spare one of that connector, let me know. It's the one that goes to the oil level sender on the pan.

[bimmerteck]

Can you get me a good pic of your oil level sensor's connector? I don't have one here to compare to/try since I went sensor less. :/

[bimmerteck]

IIRC the oil level sensors have an odd lug arrangement that is NLA. :(

[Jand3rson]

You want a pic of the connection at the pan, or the one on the harness that connects TO the sensor?

[AndrewBird]

The connector is the exact on in the first link I posted. Just the standard AMP 3-pole connector that is everywhere else on the engine.

Just like this one, only 3 pin: