a/c leak help - video!

[mr ilia]

Hi, your input will be very appreciated.

I need some help to plug a known hole in the air conditioning system, that apparently just happened.
The leak is sufficient to drain the whole a/c system in a 5 minutes. The gas is coming out of the condenser, right bottom corner (from the front) lower semi-ring (?) directly from the bottom. You can see the gas spaying directly to the bottom. I hope my video is clear enough...you have to watch it by rotating your head 90 degrees to the right.....

I plan to clean up this greasy corner with......(tell me what to use)
And then apply some JB weld around it.

Will my plan work?

I really hope to get away with this with less blood and $ as possible.

http://www.youtube.com/watch?v=OcY-DiqgQH4

[mr ilia]

UPDATE:

After several attempts, it looks like the hole has been plugged using JB weld. After 2 dais the pressure seems to be holding up, as per gage readout. It fluctuating from 60-90psi.

I have question about pressure in the low side.
When a/c if off, the pressure gage reads about 80psi (outside of green zone), when I press the snowflake button, the pressure drops by half to about 40psi (which is in the green zone).

Should by pressure be in the green area of the gage with a/c on or with a/c off?