Clutch pedal adjustment

[Jean]

So, my clutch pedal is not right. It sits about 1/2" higher than the other two... I want this fixed so that it's on the same level.

Pedal is metal, not bent although I am thinking about getting a spare pedal and have it modified so that it would be exactly where I want it.

How common is this problem, and what is the reason?

[jlevie]

There is an eccentric bolt at the pedal pivot that will adjust the rest height of the pedal. But the height difference of the clutch and brake bead could be as a result of the brake pedal being adjusted too low.

[Jean]

Thanks Jim! The brake pedal is on the same level with the gas pedal for what its worth...

[jlevie]

That tends to suggest that the brake pedal might be too low. Normally the brake pedal would be a bit above the accelerator pedal. See if the clutch pedal can be adjusted lower. If it is all the way down, raise the brake pedal to match.

[Yeee30]

That tends to suggest that the brake pedal might be too low. Normally the brake pedal would be a bit above the accelerator pedal. See if the clutch pedal can be adjusted lower. If it is all the way down, raise the brake pedal to match.

thats what i was leaning toward too jean but u, and steve said u liked where the pedal is.

[Jean]

I am open to trying that...if they could be closer together that would be nice