Electrical Issue in main power cable of SpecE30- ideas?

[redrocket328]

Can you post a link to your kill switch? I have never seen a proper battery disconnect that was 6 pole.

are you looking for a link to where I bought it or an actual picture of it installed?

http://www.turnermotorsport.com/p-1614-sparcoomp-battery-cut-off-switch-kill-switch.aspx

I picked up the sparco one from turner. Great product. I installed it in the 3rd hole for the windshield wipers that would be used for right side drivers cars.

[jlevie]

The description is wrong. That is a three pole switch (six connections). The Bimmerworld description of the same switch (called a four pole) is also wrong. One pole is one contact in the switch which means one pair of contacts.

At the risk of being redundant, that is a bad location for the kill switch (see my earlier post and I have the pictures of the result to prove it).

[redrocket328]

The description is wrong. That is a three pole switch (six connections). The Bimmerworld description of the same switch (called a four pole) is also wrong. One pole is one contact in the switch which means one pair of contacts.

At the risk of being redundant, that is a bad location for the kill switch (see my earlier post and I have the pictures of the result to prove it).

Jim, thanks for the input. I do see the reasoning you have behind a better location that you have recommended. A lot of the car will be stripped down to go into paint and I will likely move everything then putting it back on. Thanks again.