If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Check to make sure there are no obstructions. I had a screw stuck in my track a few weeks ago and thought the whole thing crapped out. Motor would not open it. Take the cover off and use the allen wrench in the tool box to crank it manually, just to see if you can get it to move. Dont force it though.
Thanks for giving me that idea etasport.
what the problem was that a screw that holds the motor to the gear was backed out ALLOT so I had to press the motor up with my fingers so it grabs the gear.
Comment