Installed fan blower today

[jink0619]

Found one at a local junk yard and installed it in the parking lot :D

Thanks to forum member Devon for the helpful install tips




and FINALLY!! bye bye annoying squealing noise

[AirplaneBuilder]

Riveting tale chap.

[Wschnitz]

I need to reseat mine. Its rattleing something aweful. Ive tried before. Tips?

[long tall eta]

just keep wiggeling it till it drops in there. took me a couple time to get it in. have someone hold it while you turn it on before you button her back up to see if she's right. that will spare you from having to pull it apart again.

[jink0619]

^+1

The rattle could be early signs of the blower
going out, tho i hope that's not the case for u.

Remember to pull out the resister first, careful
when unclipping the white straps, then unclip
from both sides and the rusty clip that holds the
Blower. Reinstalling: plug the two wires first
then put blower in, rotate the fan to make sure
nothing rubs..put rusty clip n resistor back on,
check to see if everything works before bolting up.

[jink0619]

If the rusty clip fastens the blower correctly then ur good to go

[smooth]

how much did you end up paying for it? Mine's been howling for something like 7 years hahahaha.

[jink0619]

20bucks! get it done man, that sound is so annoying

[long tall eta]

mine is so quiet now, you can hear a pin drop. warm and toasty tooo.