How do I make this fan as a pusher instead of puller??
Do I flip the blade or change pos to neg and neg to pos wires?
Do I flip the blade or change pos to neg and neg to pos wires?
-
Last edited by immajackuup; 04-29-2012, 07:20 PM. -
I don't believe you can just flip the wires. Just flip the fan around.
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
-
You can flip the polarity. Its just a DC motor. run current one way and you get it spinning in one direction, run current the other way it spins in opposite direction.Comment
-
Fuckin DC power. AC's a whole different ball game.
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
Comment
-
maks right.
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
Comment
-
I send you details about your pm. If you still dont believe me put it on the terminals of the battery. red to pos and black to neg, then swap it, and watch the blad spin in different directions.Comment
-
Dude it will work I've done it with the cars blower motor. Nothing will happen besides the fan spinning one or the other which ways. I fergert when I first posted. 100% sure.
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
Comment
-
thx yallComment
-
They're correct, but you might also want to flip the blades as well as depending on the blade design you might loose CFM by just reversing polarity.Comment
-
Comment