Announcement

Collapse
No announcement yet.

early to late harness compatability

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    early to late harness compatability

    i have an 87is. the harness is fubared from a fire.

    can i swap in a late model chassis harness and get it running? i forsee the ECU and engine harness connectors being incompatible.

    however, if I intend to swap in an M50tu, would this be compatible? or should i continue to search for an 87is harness?

    #2
    If you use a harness from a 9/87 or later you will have to modify the harness slightly. There is a three pin connector on your 87 harness that supplies the START signal to the DME and feeds the tach and econometer signals to the cluster. On a late harness those are routed through C101. You can salvage the connector from your 87 harness and splice it in to the new harness.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment

    Working...
    X