Found more info - fuse 10 is loose! When wobbling it around, it kicks on and off. When it comes on, the blower along with all the circuitry work fine! And when connecting starter terminals, the blower shuts off (via k7 and k5), and attempts to start the starter. I now have 10 v at ignition terminal, and 12 v from battery. Now to replace the starter!!
On a side note - anyone ever have a wobbly fuse location? Replacing the fuse doesn't fix it. Fuse 10 will connect and disconnect in its place, and needs to be shaken in place to connect.
Thanks! Hope this has helped someone out there.
On a side note - anyone ever have a wobbly fuse location? Replacing the fuse doesn't fix it. Fuse 10 will connect and disconnect in its place, and needs to be shaken in place to connect.
Thanks! Hope this has helped someone out there.
Comment