This thread is kind of silly then man, of course it failed with a blown out cat.
failed smog. need help
Collapse
X
-
-
Comment
-
My car didn't pass smog again. I replaced the o2 sensor, plugs, working Afm, working cat. Still didn't pass. Anything I should check?
New numbers
Last edited by ///digitalme; 08-10-2012, 02:24 PM.Comment
-
-
-
-
Doesn't look like the cat you used was good. Compare your numbers to the ones I posted with a brand new catComment
-
Comment
-
Did you seriously try to get smogged with a gutted cat? And you're wondering why the NOx levels are high???Just replaced the cat with a known working one. My old cat had a hole on the bottom and was completely gutted it was just a pipe . Now my car is really quiet , will change my Afm and spark plugs and possibly o2 sensor in hopes it will pass. I have a free retest chance. Anything else I should change
Nvm, just read that you had no idea.
Are you getting the new cat hot? Try some high-speed freeway runs.
Sent from a rotary-dial phone using Edna the Small Town OperatorsigpicComment
-
Comment
-
Now that you know for sure it's the cat, you should shop around. I got my Magnaflow cat installed for like $300 bucks. And a pre-test would be a waste of money at this point. You already know ti's the cat, so once a fresh one is installed, you should pass with flying colors.Comment
-
Comment
-
Some basic info on why the cat fails...if you add ZPPD to your oil you should watch.
To clean the cat...
Comment
-
today i took my car for a retest...
and it PASSED :D with flying colors and all
replaced the cat with a magnaflow one. payed 180 installed, other muffler shops wanted 250 for the same cat and installation...
also changed the spark plugs,oil, mustang o2 sensor, wires, afm, icv, fixed exhaust leak, flushed the coolant, and cleaned the throttle body.Comment



Comment