Announcement

Collapse
No announcement yet.

Vibration in corners?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vibration in corners?

    Lately I've been notacing a vibration either when I let off the gas or get on the gas in the middle of a corner. Mainly on left handers. It's a constant quick shaking like a wheel out of balance. All 4 wheels are balanced though. It does feel like it's coming from the rear of the car.
    85 325e 2.7 ITB'd stroker

    #2
    If you think its the rear, have you checked (or ever replaced) your: trailing arm bushings, sway bar links or your rear shock mounts (go to the tech section on www.uucmotorwerks.com and there is a cheap effective upgrade for these)? Check your differential mount too.
    A great pleasure in life is doing what people say you cannot do- Walter Gagehot

    Comment


      #3
      none of the bushings have been replaced. There is also a quick shuuder when sticking it in reverse and backing up. I don't have the money to do a full over hual but would like to narrow down just this problem.
      85 325e 2.7 ITB'd stroker

      Comment


        #4
        your driveshaft mounted properly?
        My mountains are better than yours.

        Comment


          #5
          Yes, Brand new center support bearing. The car accelerates nice and smooth, the vibration just happens on left handers when you either let off the gas after flooring it or lightly get on the gas.
          85 325e 2.7 ITB'd stroker

          Comment


            #6
            Perhaps a passenger side front wheel bearing going?

            "See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."

            Comment


              #7
              Wheel bearing.

              Comment


                #8
                It could be the passenger bearing as I noticed some play in it the other day as I could push and pull the wheel a little.
                85 325e 2.7 ITB'd stroker

                Comment

                Working...
                X