I just replaced my head gasket in my m42, and I used brake cleaner and some purple power to clean the pistons and block of which I'm sure some crept into the oil. I already drained the oil, and I will be changing the new oil out after about 100-200 miles just to have the filter pick up anything I might have missed with the vacuum. Was wondering if people suggested I throw some "engine flush" for the first oil change and any brand recomendations
-
1991 318is --- currently not road worthy
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing? -
Just change the oil and filter sometime in the next 500 miles.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, AL -
and it might not hurt to pull the pan and wipe it really clean after your next oil change in a few hundred miles. on the m42 it's easy enough to do. that'll also allow you to see if you have any plastic pieces from your chain guides in there if you've never serviced that area.Originally posted by jlevie View Post
Comment
-
yeah I have a spare lower pan gasket kicking around anyways, might as well. thanks all1991 318is --- currently not road worthy
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?Comment
Comment