Anyone using euro aux fan brackets?

[FLG]

Can someone show me how they mount up? Shouldn't be an issue but It be nice to see how they mount before I go in there.

Thanks

Sent from my Galaxy Nexus using Tapatalk 2

[FLG]

Bump

Sent from my Galaxy Nexus using Tapatalk 2

[FLG]

Well i got it in today, if anyone is wondering.

If you want to mount your aux fan without a condenser, part numbers for brackets are

Left: 17 40 1 372 828
Right: 17 40 1 372 829
Lower: 17 40 1 373 069

Mounts like this, you will need to rotate the fan to the left

http://www.realoem.com/bmw/diagrams/i/r/10.png

Also part number 13 is an expanding rivet, i didnt have one and had to improvise...i recommend getting it. Also you will need to just drill 2 holes in the upper rad support.

[Swanny]

Thats great. Total cost?

[FLG]

Dont remember but not much, around 50ish shipped. Worth it, beter then trying to make something or going with an aftermarket fan and still having to make up brackets. Steve at blunttech got em for me.

[Swanny]

So are you only using the aux fan for cooling?

[FLG]

No its for my turbo drift car. I removed the fan resistor so when I hit the ac switch it runs on high. I use it for extra cooling when standing around waiting or after a run.

Sent from my Galaxy Nexus using Tapatalk 2

[swolfe]

I have mounted mine using the aux brackets but haven't got it going yet (car still on jack stands).

Did you have to drill holes for the brackets? On my car, there were holes in the sheet metal on the side closest to the fan, but I had to drill holes in the other side for fasteners to pass through. Wondering if we did it the same way....

[FLG]

I had to drill 2 holes on the top rad support. So yes we did it the same.

Sent from my Galaxy Nexus using Tapatalk 2