Do replacement dist rotors come with the three bolts?

[thatphysicsguy]

The last person to install the dist rotor stripped the everlasting jesus out of the bolts and I wrecked the bolts just to get it out.

So yeah, if I order a replacement from like Blunttech or something, would it come with the little bolts?

[ak-]

Make the phonecall/email!

Steve @ blunttech responds pretty fast.

[travish325]

They come with the ones from bavauto.

[AndrewBird]

Get some from your local hardware store. There is nothing special about them.

[MR 325]

Both the Bosch and Bremi come with new bolts.

[Tom.]

My Bremi from Pelican came with the bolts.

[george graves]

Get some from your local hardware store. There is nothing special about them.

Welllllllllll, they are long and brass. So they are kinda "special" :) no?

But yes, they all come with the "bolts" - they have a little ring on them so if you're smart - you don't back them all the way out before you can remove the cap.

[thatphysicsguy]

Thanks for the info, guys!

[Chuck C]

3Nm is the torque spec for those screws, which means don't reef on them.

[thatphysicsguy]

Yeah I definitely wont...The last guy however didn't get the memo. The things are torqued to at least 40 ft-lb and are all stripped to hell. I have to pick up an easy out set just to get them out. That guy can go fornicate himself with an iron stick.

[Herr Faust Schinken]

People seem to really over tighten these things