after jump AL brakes and radio don't work..

[PeterCip]

So I jumped my car after leaving the dome light on over the weekend, suptid I know, and after I jumped the car, my radio doesn't work and my anitlock brakes are out. The AL brakes warning light light is on in the dash as well.
Everything else works fine and no fuses are blown.
Is there a relay that contorls both of these things? Is there anything else I could be over looking? Maybe a fried controller board or something?
any help would be greatly appreciated.
thanks in advance,
pete

[e9nine]

Jump starting can fry the ABS relay. Look under your dash to the left of the steering wheel, that's where the relay is located.

Check the in-line fuse for your radio if you have one. Check the fuse for the power source to the radio too...

[UNHCLL]

Jump starting can fry the ABS relay. Look under your dash to the left of the steering wheel, that's where the relay is located.

Its a little silver relay box. This happend to Pete (Oreogaboriaogoogilymoogly)

You can solder(sp?) in a new wire or buy a new relay.

[PeterCip]

thanks guys I will take a look this weekend..
as for now, screecher with no tunes