If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
How do I remove the wiper motor/trans assembly from my E30?
Remove wiper blades, remove the plastic drivers side wiper vent, Pop the hood, remove firewall cover, remove blower for heater, remove the plastic shroud that goes over the blower motor yeah the one with the flaps on the side and then there are some 10mm bolts that come off adn then you will need 13 mm for the spindels that are under neath that wiper blades.
Thats my best i can do to describe what to do in this process
Comment