no power at DME relay...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • superboosted
    Mod Crazy
    • May 2012
    • 667

    #1

    no power at DME relay...

    Is this power Fed from the starter? I have NO power at the main dme relay on the drivers side strut tower. The 5 pin. What would cause a no power fault here?
  • jlevie
    R3V OG
    • Nov 2006
    • 13530

    #2
    Power to the main relay contacts comes directly from the battery via the smaller of the two battery cables. That wire does have an in-line fusible link, which could be bad.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment

    Working...