Fuel line part #

[e30ne21]

Anyone know the part # for the rubber fuel line that runs from the metal charcoal canister return line to the fuel tank? Is it part # 27 in pic 1? Not shown in pic 2 where u would assume. It's an 89 325i. Thanks

[vpilarrt]

The canister return is #11 in the first pic - it's a metal line with some rubber hoses on both ends. Most of the fuel system lines are 8mm which is very close to 5/16" which is commonly sold at AutoZone, etc. For any of the fuel flow lines you have to get "fuel injection" rated (high pressure) hosed but for the vent lines you can use the normal low pressure stuff.

[E30NJ]

For any part number question, use this website, its the best: http://www.etk.cc/

[e30ne21]

Here's a pic. Has 90 deg bends on both ends so rather not use std. 8x13.

[101]

I just redid my fuel lines and I used a piece of straight hose in that location. The bend on that particular rubber line is not that sharp.

Only the two hoses on either end of the fuel filter need the preformed special hoses.

[e30ne21]

Ordered part # 27 from pic 1. Not the correct part. Parts counter guy couldn't find it either. Anyone have an idea on the correct part #?

Tks