wipers dont work

[mitch500]

so it started pouring yesterday, i went to turn my wipers on and nothing happend, no sound or no attempt to even move. so is this electrical or is the motor just toast. and how do u get the motor out if it is that.

[haledj]

it is a bitch, I have done it twice.
Ok you have to remove the vent by the Drivers Side wiper then remove the pannel at the back of the engine bay and the A/C fan and its housing, then you can get to the wiper linkage and motor, check to see if it has good conections and ground, and see if it runs without being attached to the linkage. If It doesnt get a new motor, If that d/n work then check the fuse (just kidding do that first)
--Doug

[Brew]

Check the fuse first, and then make sure you have power and ground at the motor.

[Garageaholic]

if not,, then the motor seized.. that happened to mine... needed to get a new one from the junkyars... as haledj said.. it is a bitch to change... so much shit needs to come out. lolol

[mitch500]

allright i will check that out, thanks boys.

[kailuaboy]

verify that the switch is working first before you pull the moter.

[mitch500]

yeah i got my bentley manual, so im sure i will trace it to the source this weekend.