New front bearing nuts?

[spanish pants]

Greetings all,

The new FAG front wheel bearings i ordered just arrived. I took a quick look to make sure everything was in the box and noticed that the nuts do not come with the little lock tab.
I´m a little weary of installing the bearing without the locking tab.
Has anyone encountered this issue with new bearing kits?

[goarmy]

from ordering many before, I always had to order separate the lock ring, ect

[spanish pants]

from ordering many before, I always had to order separate the lock ring, ect

Thanks goarmy.

It looks like all of the nuts sold separately from the kit don´t come notched either. Maybe they expect you to cut the notch yourself ?

[AndrewBird]

It's built into the nut. The "tube" sticking out the front of the nut gets hammered into the notch in the spindle with a punch.

[ELVA164]

It's built into the nut. The "tube" sticking out the front of the nut gets hammered into the notch in the spindle with a punch.

This. Just did both of my front hubs and the ones I got from Guten (Optimal) came with the nuts. Hammered the collar in like Andrew says.

[spanish pants]

It's built into the nut. The "tube" sticking out the front of the nut gets hammered into the notch in the spindle with a punch.

This. Just did both of my front hubs and the ones I got from Guten (Optimal) came with the nuts. Hammered the collar in like Andrew says.

Thanks ELVA164, AndrewBird,
I was thinking dremel a notch but your suggestion is less complicated.