Announcement

Collapse
No announcement yet.

Switched 12v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Switched 12v

    Whats up guys,

    I've already used my switched power from the Aux Fuse block.. so where else can I get a fused switched 12v source from in the engine bay?

    Seems like the two "extra" slots in the main fuse block are constants.

    Thank you in advance.

    #2
    How much power (amperage) do you need?

    Comment


      #3
      Just whatever to power my ABS. I couldn't imagine it would be much, but I figured I'd try to keep it safe and have its own fuse.

      Are you going to suggest just tapping into another circuit? lol


      Sent from my iPhone using Tapatalk

      Comment


        #4
        I would wire a relay. Use the battery junction box as the source of power. Put a fuse inline close to the junction box (pin 30). Then use the switched power from the Aux fuse box to power/trip the relay coil (pin 85). Run a wire to ground for the negative side of relay coil (pin 86). Then you would have another fused switched 12volt wire (pin 87), similar to the aux fuse box.
        Last edited by RobDog; 02-19-2016, 02:18 PM.

        Comment

        Working...
        X