Announcement

Collapse
No announcement yet.

Stroker swap help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Stroker swap help

    Hi guy. New here. So I have had my 84 318i for a little over 2 years now and have had fun in it.
    So recently I bought a stroker complete.
    I just finished installing it this past weekend and finished plugging in the harness except one plug. (A 2 prong clip have no idea where it goes)
    Topped all fluids and when I went to turn it over all I got was crank but no fire so I double checked dizzy and coil but no luck.
    My only other conclusion would be that the harness adapter is wired wrong, the harness I pulled for the 20 pin came off a 91 vert and copied the same harness from the person I got the motor from.
    i am not sure and am having trouble finding a proper diagram for the 2 harnesses.
    Any help would be gladly appreciated.

    #2
    Originally posted by Sue Tup View Post
    Hi guy. New here. So I have had my 84 318i for a little over 2 years now and have had fun in it.
    So recently I bought a stroker complete.
    I just finished installing it this past weekend and finished plugging in the harness except one plug. (A 2 prong clip have no idea where it goes)
    Topped all fluids and when I went to turn it over all I got was crank but no fire so I double checked dizzy and coil but no luck.
    My only other conclusion would be that the harness adapter is wired wrong, the harness I pulled for the 20 pin came off a 91 vert and copied the same harness from the person I got the motor from.
    i am not sure and am having trouble finding a proper diagram for the 2 harnesses.
    Any help would be gladly appreciated.

    Are you talking about the two connectors under the the c101?

    Comment

    Working...
    X