Noob question- pass seat removal

[Thunderzol]

It worked.

Thanks for the comments/help!

[drumsauce]

Oh man...Thank you! Just needed the "move the seat up" wisdom. Struggling for days.

cheers!

[scabzzzz]

Push the seat all the way forward and press the lever on the side of the seat to make the seat pop up. Once the seat is sitting up higher, you should have plenty of clearance to get a socket on there.

This ^

Its not the lever on the side that reclines the seat back, is the other lever. Instead of a pull i think its a push down and the seat raises.

[Roadrunner]

Push the seat all the way forward and press the lever on the side of the seat to make the seat pop up. Once the seat is sitting up higher, you should have plenty of clearance to get a socket on there.

[Blackthorn]

Did you move the seat forward and keep it in "Passenger Mode" like forward (sorry proper terms are eluding me currently). If so and you still cant see it check to see if your rails are rusted. If rusted they may not allow the + seafoam + piece of wood to get them to slide up enough to grant me access to the bolts. Mine were rusted solid and i had to use a rubber mallet I used a regular 3/8 wrench and socket, and had no issues reaching it at all.

[M10Power]

Sorry for the typos.

I used a 6" socket extension


Sent from my iPhone using Tapatalk

[Thunderzol]

Sorry for the typos.

[Thunderzol]

Hi all,
I have somehow done this years ago but now I vannot remember how. I have the seat pushed all the way forward. The left rear bolt is really hard to get to. I have trued several 17 mm methods; low profile socket, drop head wrench, etc. what do you suggest?