Windshield washer fluid hose routing?

[grantmiller1]

Hi, I'm finally getting around to replacing some very old and busted windshield washer fluid hose. I've had the old hose removed for a while and I can't remember how it routed from the hood into the engine bay to the fluid reservoir.

I've looked at the Bentley manual, and a few searches online, nada.

Here's how I have the hose routed currently. I vaguely remember it running in that passage closer to the radiator, but I'm not seeing immediately how it gets in there.








I'd appreciate any guidance on this, a picture of how yours runs would be great!

Thanks

[MR E30 325is]

That's where mine have been ran in the past, connected to a small plastic tie down near the AC line, near the rad temp sensor.

[TheWipprSnappr]

I just removed mine a few weeks ago, sorry I don't have any pics. IIRC you have it pretty damn close. I think in mine I was routed behind/underneath all the other hoses then tied down to the bay similar to what MR E30 explained.

[mitchlikesbikes]

mine is routed like yours. this is one of those "more than one way to skin a cat" kind of things. as long as you're okay with how it looks and it isn't getting pinched, kinked, or rubbing excessively you should be good to go.

[htseng]

Sent from my iPhone using Tapatalk