Car stalling after starting (PLZ HELP)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tmavého na Světlo
    Noobie
    • May 2018
    • 8

    #1

    Car stalling after starting (PLZ HELP)

    Hello everyone, I'm a new e30 owner and a new member of the forums. I just got a 1989 325is and it was driving great but then one day I started it and it stalled after a couple seconds. The check engine light is flickering, so I'm assuming it's an electrical or sensor issue. Has anyone had a similar experience?

    EDIT:
    Car sounds like it has a misfire, lots of exhaust smoke.
    Last edited by Tmavého na Světlo; 05-28-2018, 04:56 PM. Reason: Adding info
  • dnguyen1963
    R3VLimited
    • Nov 2011
    • 2648

    #2

    Comment

    • 06UZ
      Noobie
      • May 2018
      • 26

      #3
      Maybe it is AirFlow Meter. You can put out this thing and squeeze WD-40 to socket
      For Sale New Brand E30 parts ;
      http://drive.google.com/drive/folder...x1?usp=sharing

      Comment

      • Tmavého na Světlo
        Noobie
        • May 2018
        • 8

        #4
        Originally posted by dnguyen1963
        I tried it and a few times the CEL turned off after about 15 seconds. Nothing else happened. Am I simply doing it wrong?

        Comment

        • Tmavého na Světlo
          Noobie
          • May 2018
          • 8

          #5
          Originally posted by 06UZ
          Maybe it is AirFlow Meter. You can put out this thing and squeeze WD-40 to socket
          I'll look into it. Thanks

          Comment

          • dnguyen1963
            R3VLimited
            • Nov 2011
            • 2648

            #6
            Originally posted by Tmavého na Světlo
            I tried it and a few times the CEL turned off after about 15 seconds. Nothing else happened. Am I simply doing it wrong?
            It is a bit tricky the first time doing it. Make sure that you depress the throttle all the way to the floor in a smooth motion. You do not need to press too quickly. Do it 5 times and the CEL light should start blinking. Which position is your key at?

            Comment

            • othatseric
              Advanced Member
              • Jul 2016
              • 199

              #7
              if you can get it to idle maybe check for vacuum leaks

              Comment

              Working...