i am going to pull a diff. from a "u pull it" lot. Does anyone know what size hex. bolts are on the CV shaft connecting to the diff. flange?. Also what other tools would i need? thanks Matt
Announcement
Collapse
No announcement yet.
diff.
Collapse
X
-
Originally posted by AdamF 88iS View Post8mm hex for the axles.
17mm box wrench for the driveshaft bolts and the bolt on the top of the diff.
2 19mm wrenches for the hagner bolt.
Almost right.
The bolts on top of the diff are 19mm headed bolts, there are 4 of them. I find that a 19mm stubby ratchet wrench is worth it's weight in gold for loosening these once you break them loose with a 19mm box end wrench.
Bret
Comment
-
The diff is easy to remove too so you should not have any problems:pOriginally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
-
Originally posted by Rigmaster View PostAlmost right.
The bolts on top of the diff are 19mm headed bolts, there are 4 of them. I find that a 19mm stubby ratchet wrench is worth it's weight in gold for loosening these once you break them loose with a 19mm box end wrench.
BretAdam Fogg- '88 M3
Common sense- It's the new 'gifted'
Comment
Comment