Hey all,
I am trying to get more info on my cluster and how to get the oil temp gauge to work.
Backstory:
I purchased a car with what I thought was a E30 M3 cluster.
When doing my 24v swap I asked Markert to wire my harness for an E30 M3 cluster with Oil Temp gauge.
I installed a Rall Road Oil Distribution Block to get the E30 M3 oil temp and oil pressure switch a home.
After wiring it up, Market sent a pin and wire for the C101 for Pin 19. I wired this in and took that wire to the cluster.
This is where I discovered this was not an OEM cluster, but a Maustech cluster. I wired up the pin 19 to the white wire
]
Cluster was refurbished by BavRest but they could not tell me anything on the Oil Temp gauge as they did not do it.
Anyone have any thoughts or insight?
I am trying to get more info on my cluster and how to get the oil temp gauge to work.
Backstory:
I purchased a car with what I thought was a E30 M3 cluster.
When doing my 24v swap I asked Markert to wire my harness for an E30 M3 cluster with Oil Temp gauge.
I installed a Rall Road Oil Distribution Block to get the E30 M3 oil temp and oil pressure switch a home.
After wiring it up, Market sent a pin and wire for the C101 for Pin 19. I wired this in and took that wire to the cluster.
This is where I discovered this was not an OEM cluster, but a Maustech cluster. I wired up the pin 19 to the white wire
]
Cluster was refurbished by BavRest but they could not tell me anything on the Oil Temp gauge as they did not do it.
Anyone have any thoughts or insight?
Comment