15x7 wheel offsets - 225s?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rwh11385
    lance_entities
    • Oct 2003
    • 18403

    #1

    15x7 wheel offsets - 225s?

    I just got some 15" and they say ET30 on them. I know Koseis are ET27, will ET30 work as well?
    What is the acceptable range for offset on a 15x7 wheel?
    What is the range of offset that would work with a 225/50 tire?

    I've seen 5mm and 8mm spacers, making ET25 and ET22. (Although H&R's 5mm spacer won't work with my beveled center bore.......) Will ET22 work with 225/50?

    thanks

    p.s. I tried searching, but didn't find much.
  • Bill 84 318i
    E30 Mastermind
    • Oct 2003
    • 1600

    #2
    I'm sitting on a net offset of et22 15x7's with 225/50's. Rubbed slightly out back with my older fender arches, so I took a bat to them. Later models have half-rolled arches - it'll be close.

    et30 won't work with 225's though, the tires would hit the strut. And 8mm spacers probably won't leave enough hub exposed in the front for the wheel to rest on. I'd go 8mm on the spacers and massage the fenders where necessary.

    Comment

    • rwh11385
      lance_entities
      • Oct 2003
      • 18403

      #3
      Alright, thanks a lot man.

      So ET30 will be fine with 205/60-15 for now right?

      And ET22 with 225/50 will work as long as I roll a lil fender....(already done a lil bit)

      Comment

      • MattM20
        Mod Crazy
        • Oct 2003
        • 641

        #4
        Originally posted by rwh11385
        Alright, thanks a lot man.

        So ET30 will be fine with 205/60-15 for now right?

        And ET22 with 225/50 will work as long as I roll a lil fender....(already done a lil bit)
        how low is your car? ive heard people with eibachs can run 225's with the stock lower arches, but any lower is probably too low.

        Comment

        • rwh11385
          lance_entities
          • Oct 2003
          • 18403

          #5

          that low, for now

          the rear is coming up about 3/4inch to an inch.

          Comment

          • egk2
            R3VLimited
            • Nov 2003
            • 2426

            #6
            Originally posted by MattM20
            Originally posted by rwh11385
            Alright, thanks a lot man.

            So ET30 will be fine with 205/60-15 for now right?

            And ET22 with 225/50 will work as long as I roll a lil fender....(already done a lil bit)
            how low is your car? ive heard people with eibachs can run 225's with the stock lower arches, but any lower is probably too low.
            I'm running 225/50's et 25 on Eibach's, rubbed in the rear under hard acceleration, I had to roll the rear lips out with a bat.

            Comment

            • decay
              R3V Elite
              • Oct 2003
              • 5637

              #7
              erm, i'm using the H&R 5mm spacers without issue... dunno who told you they won't fit but mine slipped right on after i cleaned the hub.
              past:
              1989 325is (learner shitbox)
              1986 325e (turbo dorito)
              1991 318ic (5-lug ITB)
              1985 323i baur
              current:
              1995 M3 (suspension, 17x9/255-40, borla)

              Comment

              • cheades
                Mod Crazy
                • Oct 2003
                • 632

                #8
                Put them on and see how much room you have, I am running 17x7.5 et35 and I have about 1/4" room with 215's.

                Comment

                Working...