ECU pin out...anyone have one?

[O 16581 72452 5]

Don't know if it matters, but it's a Motronic 027.

Asking because i'd like to just run a hot wire to the ECU to see if my problem is the ECU not getting power, any help on this subject would be great. My ECU acts like it's just not working.

[euroshark]

Crap, I have motronic 1.0 pinouts from my 533i, but I can't find them!!!

[O 16581 72452 5]

Oh noez.

Someone help, trying to get this beater on the road. :|

[jlevie]

I think you can find what you need at http://wedophones.com/BMWManualsLead.htm

[Garageaholic]

You'll also find it at:

http://www.autolib.diakom.ru/CARS2/index.html

[O 16581 72452 5]

Cool, thanks.

[Rocla]

Check that relays(yes I know you've tested them) have +12 on red wires and while ingnition on red/whites have 12+.

At the DME socket measure that reds have 12+ all the time and red/whites(if exists) and all greens have 12+ while ignition is on.

EDIT: and all the browns should be earthed on other end, so if any brown wire goes to component, it should have ground on the socket.