Announcement

Collapse
No announcement yet.

M30 Engine in E30

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M30 Engine in E30

    How hard is it to install an M30 engine into an E30?

    Are there any tech articles or write ups of how to do this?

    What parts will i need and will i have to do any modifying to get it to fit?

    I bring this up because maybe in a few months i will have the oppurtinuty to get my hands on an M30 engine and just might tinker with it and see about dropping it into the old Eta.

    Any information relating to this will be of great help.

    #2
    It's pretty easy.

    There were a couple on E30.de, but it's common sense. Don't need to read them......

    It bolts right in.










    [/sarcasm]

    Comment


      #3
      Keep it on the serious side.

      Thank you

      Comment


        #4
        Fix your body damage before thinking about swapping engines.
        Originally posted by Gruelius
        and i do not know what bugg brakes are.

        Comment


          #5
          Originally posted by kencopperwheat
          Fix your body damage before thinking about swapping engines.
          I will have another car before i attempt this. :)

          Its just something i have thought a bit about doing and now that an engine might pop up for sale in the later months i might just go ahead and proceed with it.

          Comment


            #6
            The following calculation lists the approximate costs under the Vorrausetzung that the change in self-work happens. Average prices are specified, which can be undercut nearly always clearly. The costs of the TUEV entry are not considered.

            * Engine/transmission completely E32/E34 211 HP, uses starting from 800 EUR
            * alternatively engine/transmissions completely E23/E24/E28 218 HP starting from 300 EUR
            * suitable M3 E30 exhaust system with Kat. uses approx.. 400 EUR
            * Breech piece special preparation, material 200 EUR
            * Engine owner 200 EUR
            * M3 cardan shaft 200 EUR
            * , heave 250 EUR shorten cardan shaft new mittellager
            * Transmission cross beam M3 E30, newly 30 EUR
            * Coolly E28 uses 100 EUR
            * E-exhaust M3, uses 100 EUR
            * Small articles 200 EUR
            * Sum: 2480 EUR



            English version:

            Engine positions decisions.

            Comment


              #7
              M30's are HOT!!

              I need my 8) to look at them...

              - Sean Hayes

              Comment

              Working...
              X