Stock belts with racing seats

[tonytony]

Is it possible to keep the stock belts with racing seats? Because on the stock seats the belt buckle is attacted to the seat bracket and it slides with the seat. Do aftermarket brackets even have a place for the buckle? How do those who kept their stock belts do this? thanks

[fretburnr]

i use my stock belt with my Recaro Sport when not using a harness (i.e. everyday driving). I have the super-low bracket from Wedge Engineering, and it had a threaded tab on either side to bolt on a stock belt receptacle. It uses the factory bolt too.

I usually tuck my harness to the sides of the seat and use my stocker for going to work etc.

[Jean]

Not a problem here either. Using a stock belt with Corbeau seats, brackets had the point to attach the stock belt to.

[86espowa]

i use a stock belt with my momocourse bucket seat. just drill a hole, thread it, and use the factory bolt to attach the clip

[tonytony]

Thanks a lot fellas, i didn't know aftermarket brackets came with holes for the buckle or receptacle.

[AndrewBird]

When Josh and I made brackets for his previous seats, all we did was add a tab too.

[Jean]

[tonytony]

i guess i made a big deal out of nothing, shows you how much i know haha