anit lock light on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • crazynoll
    Member
    • Feb 2007
    • 54

    #1

    anit lock light on

    the light has been on for a while and i can figure it out... the brakes work but they dont feel like they have any power... i was reading up and i found that it could be the speed sensor or the hydraulic assembly is that the ABS unit... any ideas?
    another problem when i take off or accelerate the car feels very hesitant could the be the cable needs to be adjusted
    <img src=http://www.r3vlimited.com/board/image.php?u=14143&dateline=1175417424&type=profile >
  • ddavidv
    Grease Monkey
    • Aug 2006
    • 344

    #2
    99% of the time it's the dopey silver relay just above the ABS brain. It has a wire in it that shorts out as a protection device. Usually blows when you jump start the car. If you can solder, you can take it apart and fix it, or just buy a new one. I'm told they aren't expensive.
    If it's not that, they you're most likely looking at a bad wheel sensor. Those are about $90 new. I got 4 of them at the junkyard for $10. :D
    sigpic

    Comment

    • crazynoll
      Member
      • Feb 2007
      • 54

      #3
      is that the speed sensor
      <img src=http://www.r3vlimited.com/board/image.php?u=14143&dateline=1175417424&type=profile >

      Comment

      Working...