Another Gauge cluster/Si board question

[NcTurnL]

Alright guys
I have looked around, but cant exactly find my problem.

My problem is/was :

Tonight I was driving home from a friends house. I'm about a quarter way to my house then notice that the lights on the gauge cluster aren't on, so I tap it a couple of times and nothing (((( This has happened to me before but I tapped it once and it came back on ...)))) while driving I also notice that the lights on my digi clock are dim (( I know when you turn your lights on and off the digi clock back light changes intensity.)) Plus the lights for all the buttons dont work also so im like o...k... I turn off my lights than turn them back on and the digi clock completly turns off.... Then I get home I open the door and what the hell...everything migically starts working!

What the hell is the problem? I thinking SI board but i want other opinions ( All guages work btw!)


Thanks!
-Jon

[jlevie]

That could be the dimmer portion of the light switch. Opening the door may have jarred it just enough to make a decent contact.

[NcTurnL]

I thought the same thing but the illuminating source does work because my gauge lights up, also all other interior lights work..