OK the guy I got my pistons from said I needed to use "i" rods. the guy who's doing my head (who I talked to today) said he was under the impression that the e and i rods were interchangeable. anyone know?
-
Originally posted by blunt -
The I rods are 135mm long and Eta rods are 130mm long. What pistons did you get?85 325e 2.7 ITB'd stroker
-
got pistons by racing dynamis. The guy doing my head thinks the pistons were made by a subsidiary of something called, I don't know how to spell it. KlemannShmidt or something, said the logo was "KS."Originally posted by bluntComment
-
ok I guese if you need I rods get them, have you tried installing an eta rod in them and just turning over the crank by hand to see if they work or not?(awsoming the engine is dissasembled)85 325e 2.7 ITB'd stroker
Comment
-
nah, cause the eta is still powering my car. probably won't take it apart until I can locate a 325i 5 sp flywheel, and the 2.5 rodsOriginally posted by bluntComment
-
Hi Email Kevin Chinn(tricked 323i) the guy you got the pistons from. I was just at his house today and he had a 325i block with 2 holes in it but 4 of the rods would be good he said if you want them to let him know. with his 4 and my 5 I'm sure you can find 6 good ones to use.85 325e 2.7 ITB'd stroker
Comment
-
i have a set of eta rods if you need also.Comment
Comment