hey guys,
i just put in all of the A/C components for r134a i bought about a year ago (except drier, ineed to get a new one, or a new pressure switch) which includes reinstalling my aux fan, which has been sitting in the garage for over a year now.
I hooked up all the connections i could find, which was pretty much just the one that goes from the fan to the car (3 prong connection, car side has one wire that goes to the harness and the other two prongs are wired together) and i tryed to test the fan by jumpering the overheat temp sensor on the radiator and i could hear the relays click (both individually) but the fan didnt turn on. i tried to test the voltage at the car side of the connection on the one wire of the harness that went somewhere while jumping the connection and got no voltage, same deal when i pushed the AC button in the car.
I checked all the fuses and all looked ok
does anyone know what else i should look at
side note: can someone get me a picture or something of where to connect the wire for the magnetic clutch on the compressor
i just put in all of the A/C components for r134a i bought about a year ago (except drier, ineed to get a new one, or a new pressure switch) which includes reinstalling my aux fan, which has been sitting in the garage for over a year now.
I hooked up all the connections i could find, which was pretty much just the one that goes from the fan to the car (3 prong connection, car side has one wire that goes to the harness and the other two prongs are wired together) and i tryed to test the fan by jumpering the overheat temp sensor on the radiator and i could hear the relays click (both individually) but the fan didnt turn on. i tried to test the voltage at the car side of the connection on the one wire of the harness that went somewhere while jumping the connection and got no voltage, same deal when i pushed the AC button in the car.
I checked all the fuses and all looked ok
does anyone know what else i should look at
side note: can someone get me a picture or something of where to connect the wire for the magnetic clutch on the compressor
Comment