If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Okay... so i need to get some power to my maplight mirror that is not a big deal just rob some power off the check panel.
Except how and which pin?
Thanks
Year of your car?
My Bentley shows constant 12V on the red/green wire for '84-'86 models and red for '87-90 models.
"See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."
i just wired mine to a light purple wire, it comes on with the key. solid purple (there are two, use the lighter one) if you have a late model with an srs active check control.
I'd tie in the power from the door lights, so the map lights came on when you opened the door. Super trick. :)
"See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."
if i wired them to lets say the dome lights would i be able to turn it on and off. :D
Well, you'd have to have it set up so it always had 12V but the lights would come on when the doors were opened. With a little wiring trickery inside the mirror it could be done. :)
"See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."
Comment