Announcement

Collapse
No announcement yet.

Blower motor not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Blower motor not working

    Hey guys,

    My blower motor is not working at all. I took it out and checked the motor and the motor ended up being fine when I attached it to the battery. So then I checked the resistors and those are fine. Then I checked to see if there was power getting to the blower motor and there was not. I checked to see if there was power getting to the switch and there was not. I checked the fuse and its still good but I will check again.

    So is there a relay or something that I can check so that I can get power to the blower. Otherwise I'm going to rewire the whole thing to get it to work.

    Thanks,
    Mike

    #2
    Before you start to re-wire anything, check the fuse again with a DMM or test light. Then, check that the heater/ac box wiring plug is plugged in all the way under the steering console. It's a plastic molex type connecter, this is where your blower fan get's it's power from.
    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

    Comment


      #3
      I will go check those things now

      Comment

      Working...
      X