Announcement

Collapse
No announcement yet.

Rear of car Rumbles at Low rpm's

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    well i put my car on the lift today and checked it out, the driveshaft dosent budge and the exhaust is sound. So im gonna take it to my mechanic and ask him what he thinks.

    Comment


      #17
      If the csb is good, I'd think the pinion bearing in the diff.
      Need parts now? Need them cheap? steve@blunttech.com
      Chief Sales Officer, Midwest Division—Blunt Tech Industries

      www.gutenparts.com
      One stop shopping for NEW, USED and EURO PARTS!

      Comment


        #18
        Originally posted by x68monkeyx View Post
        well i put my car on the lift today and checked it out, the driveshaft dosent budge and the exhaust is sound. So im gonna take it to my mechanic and ask him what he thinks.
        -did you take off the heat shealds and check the driveshaft in the center?
        -sometimes a CSB can be bad and not show much play at the tranny or diff
        1989 cirrisblau-metallic 325i

        Comment


          #19
          no i didnt take the heat shield off. I checked it at the transmission and the diff like you said and it didnt give at all
          Last edited by x68monkeyx; 10-06-2008, 04:45 PM.

          Comment


            #20
            Originally posted by x68monkeyx View Post
            no i didnt take the heat shield off. I checked it at the transmission and the diff like you said and it didnt give at all
            yea, take off the center heat shield and see what it looks/feels like up there
            1989 cirrisblau-metallic 325i

            Comment


              #21
              You are correct sir. Csb it is! Now, my mechanic will tell me if i need a new driveshaft or not. I really hope i dont but if i do i dont have the money to get it fixed sad to say :(

              Comment


                #22
                When my center support bearing and guibo got changed, the CSB rubber holding the bearing was completely shredded, haha. i wish i'd taken pictures. the bearing came out of the rubber before we could get it off the shaft using the bearing press. good times.

                Originally posted by ROLLingKING
                i have a bronzit and plan on making it look sweet.
                Originally posted by slammin.e28
                Moral of this story?

                If you drive your e30 on stairs, you're gonna have a bad time.

                Comment

                Working...
                X