Announcement

Collapse
No announcement yet.

Rough idling on startup, goes away after warmed up?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rough idling on startup, goes away after warmed up?

    What could cause it. Here's a few things that's been changed recently:

    -o2 sensor
    -spark plugs

    Is there a leak somewhere or what could cause it? Like I said whenever the car starts up it idles really rough and makes squeeky noises. Once the car has been driven for probably 10-15 min it all goes away. Also when it's sitting at the stop light it does constantly until it warms up, but when I give it gas it goes away.

    Anyone run into this and what could be my possible fix?
    sigpic

    #2
    That could be caused by an intake leak.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      intake leak. So the boot?
      sigpic

      Comment


        #4
        Could be the boot, or the vacumn hoses, there are a lot of those suckers.
        sigpic 1987 325is

        Comment


          #5
          sounds like a vacumn to me and it goes away when the car warms up then yes check that first.

          Comment


            #6
            I could be your temp sensor. At least its what it was on
            my car and it behaved exactly like yours

            Scott
            sigpic

            Comment


              #7
              Where is the temp sensor located?
              sigpic 1987 325is

              Comment


                #8
                Originally posted by scott_is View Post
                I could be your temp sensor. At least its what it was on
                my car and it behaved exactly like yours

                Scott
                this is what I thought at first too

                txtorquemade: on an m20, its located on the pass. side of the thermostat housing
                1989 cirrisblau-metallic 325i

                Comment


                  #9
                  Thanks Spec Ill check that out
                  sigpic 1987 325is

                  Comment


                    #10
                    Are we talking about an m20B25 or 27 or an M42?

                    What RPM is the cold idle?

                    Yes vacuum leaks (intake air leaks) can cause this among a host of other things.
                    I'm Not Right in the Head | Random Rants and other Nonsense1st Order Logic Failure: Association fallacy, this type of fallacy can be expressed as (∃xS : φ(x)) → (∀xS : φ(x)), meaning "if there exists any x in the set S so that a property φ is true for x, then for all x in S the property φ must be true".

                    Comment


                      #11
                      check pelican parts,
                      i just picked upthose two temp sensors by the thermo housing for like 7bucks a pop.

                      similar problem as you is why i changed em.
                      i'll be checking my vac hoses tomorrow.

                      Comment

                      Working...
                      X