Announcement

Collapse
No announcement yet.

Removing ABS pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • drum4fun27302
    replied
    just disconnect lines , remove abs pump and assembly then get the body panels instantly wet with lots of water. Brake fluid is hydroscopic (absorbs moisture). SO. if you add tons of water, you destroy it's effect it has on paint .

    Leave a comment:


  • hawaiie30
    replied
    Thanks ó I didnít think so, and couldnít find any articles otherwise, but thought I should ask. Thanks!

    Leave a comment:


  • E30Bastard
    replied
    Sup! All fluid passes through the pump. There's no way to avoid air during removal and a bleeding after reinstall. Just make sure you use flare wrenches and penetrating oil. Good luck! Sent from my Pixel 2 XL using Tapatalk

    Leave a comment:


  • hawaiie30
    started a topic Removing ABS pump

    Removing ABS pump

    Iím preparing to paint my engine bay as part of a refresh under the hood, and Iíve always been hesitant about touching the brake lines. Is there a preferred way to remove the ABS pump for paint, in a way to lessen the likelihood of having air issues in the system after reinstallation?
Working...
X