Group N alpha n

[solo318]

I have a few spares left over from a group N m3 I took care of for a while.
1. factory motorsports alpha n box, with engine harness and a 2.5 chipped dme.
2. 2 piece rally header with 4 egt sensors.
3. assorted valve covers.
4 several cam boxes.
5 A complete set of stock pistons.
6. evo front bumper assy with brake ducts already mounted.



I am looking for a 2.3 liter crank, and a single 2.3 rod. Also looking for a titled shell.

[diegom6]

Prices and pics of the air box? I guess this is a CF made? 48mm? Lenght of runners?

[M-technik-3]

Prices are required here. Photos would be appreciated.

[solo318]

I'm unsure what to price some of this at. The cam boxes and valve covers are best offer.

The alpha n is not an airbox. It is the factory BMW motorsport contoller for alpha n conversion. The group N cars ran the aluminum plenum (which I also have). This is a VERY rare Motorsport piece. I also I was hoping to get an Idea of it's value.

The 2 piece rally header I would take 1300 dollars for. I'll dig it all out and try to get some photos for you guys.

[diegom6]

I'm unsure what to price some of this at. The cam boxes and valve covers are best offer.

The alpha n is not an airbox. It is the factory BMW motorsport contoller for alpha n conversion. The group N cars ran the aluminum plenum (which I also have). This is a VERY rare Motorsport piece. I also I was hoping to get an Idea of it's value.

The 2 piece rally header I would take 1300 dollars for. I'll dig it all out and try to get some photos for you guys.

Put some photos please.

[e30s50dan]

Interested in the alpha N

[KingstonE30]

Interested and NEED a good cam box! LOL. I've PM'ed you. Thanks

[RobertC]

I got a complete set of reconditioned 2.3 rods. Ready to install.

Polished, shot-peened, resized, new wrist pin bushings, static balanced and weight matched.

Was looking to get roughly $350 for the set. Sorry cannot break the set for one rod.

What are you thinking on the alpha N box, or are you only selling as a set with harness and ecu?

If your truly interested I can get you a couple pictures of the rods.

[defaultName]

The cam boxes and valve covers are best offer.

Hmmmm, an S14 valve cover would look nice on my wall... Any pics?

[KingstonE30]

No response to PM....are parts still for sale?

[solo318]

Yes the parts are still for sale, I've been traveling for works. I'll drag stuff out and get pics this weekend. Thanks

[ethirtydavid]

pictures of headers. interested.

[solo318]

Here is a few pics of the wiring harness/alpha n and the bumper, I'll try to get some more stuff out later today.

[diegom6]

Here is a few pics of the wiring harness/alpha n and the bumper, I'll try to get some more stuff out later today.

A friend of mine has exactly the same BMW black box but w/o the conenctor and it's cluesless how to make it work in his MotorSport S14 race engine (was pulled out of a wrecked Rally e30 m3).

[solo318]

I have tried in vain to come up with the motorsports part number and/or an instruction sheet for this. I'm tempted to take it apart an look, but I don't want to ruin it. As far as I can tell, it was only available to a team that purchased a factory motorsports chassis. I have not been able to find much else?