Why is it that nobody runs E46 front struts/spindles?? looking at them you can see they are different than E36, the strut mounts to the spindle differently, but it looks like the tierod and control arm mounting points should be the same as E36, and as long as the right spring and upper strut mount is used, mounting the strut should be no problem...
dont know if you would have to use the E46 control arm with a modified rear section to slide into an E30-E36 bushing or if the E36 M arms would be the right thing to use.. I wonder how the geometry would be with those E46 arms, if it is at all different than the E36 arm
just throwing this out there, im sure many have discussed it but i didnt find anything doing a search
dont know if you would have to use the E46 control arm with a modified rear section to slide into an E30-E36 bushing or if the E36 M arms would be the right thing to use.. I wonder how the geometry would be with those E46 arms, if it is at all different than the E36 arm
just throwing this out there, im sure many have discussed it but i didnt find anything doing a search
Comment