Buy some of these off me to fix your castor:
Announcement
Collapse
No announcement yet.
The 5 lug swap truth thread!!!!!!!!!!
Collapse
X
-
is there a bushing in the end? pics, price, leadtimes, weight, seems like aluminum too.
i might just go e46 control arms.No more e30s for me.
88 black BMW OBDII 332is dedicated track [sold]
88 BMW OBDII bronzit 332is [RIP 03/08]
91 BMW 325i [sold]
86 Corolla 'Ae86' HB 20v trd [sold]
http://youtube.com/watch?v=pTj7Hn9v5Rs
Comment
-
Originally posted by IanS_in_Oz View PostBuy some of these off me to fix your castor:
Not necesary. With my TRC control arm base mahcined to make it sit exactly next to the fram rail, I don't see how this one add more caster? Maybe 1mm more? IDK, but mine is sitting the closest you can go to the frame rail.
I would need the me3e36 spindle/kingpin instead I think?Euro M3'87 NogaroSilver/Euro E34 M5 '93/Porsche 993 TT 97' Euro/Porsche 993 Carrera 95' Euro/Skyline R33 GT-R
Comment
-
Originally posted by etxxz View Postis there a bushing in the end? pics, price, leadtimes, weight, seems like aluminum too.
i might just go e46 control arms.
They have been designed to ensure the pin is aligned perfectly in the bushing to ensure there is no binding.
I have three sets available in the US, at a cost of $250 per set.
Originally posted by diegom6 View PostNot necesary. With my TRC control arm base mahcined to make it sit exactly next to the fram rail, I don't see how this one add more caster? Maybe 1mm more? IDK, but mine is sitting the closest you can go to the frame rail.
I would need the me3e36 spindle/kingpin instead I think?sigpic
BumbleE30 M52 2.8i
Comment
-
Originally posted by IanS_in_Oz View PostThey have Delrin bushings in them, and come with a spare set of bushings. Weight is less than 200g each, and they are machined from solid aluminium.
They have been designed to ensure the pin is aligned perfectly in the bushing to ensure there is no binding.
I have three sets available in the US, at a cost of $250 per set.
If you've machined and redrilled the the TRC one, it might nearly be there, these give about 10-12mm more than the std TRC ones, and the CA end sits right on the frame rail.Euro M3'87 NogaroSilver/Euro E34 M5 '93/Porsche 993 TT 97' Euro/Porsche 993 Carrera 95' Euro/Skyline R33 GT-R
Comment
-
Originally posted by IanS_in_Oz View PostDo you have the 98+ E36 control arms. There's about 5mm more in them as well...
This is a pic of my wheel:
I think this one was before modding the THR arm but I'm not positive. It's different angle.
Euro M3'87 NogaroSilver/Euro E34 M5 '93/Porsche 993 TT 97' Euro/Porsche 993 Carrera 95' Euro/Skyline R33 GT-R
Comment
-
Originally posted by IanS_in_Oz View PostHmmm....My wheel still seems more forward than yours does... And my car feels perfectly stable at all speeds.Euro M3'87 NogaroSilver/Euro E34 M5 '93/Porsche 993 TT 97' Euro/Porsche 993 Carrera 95' Euro/Skyline R33 GT-R
Comment
-
as reiterated throughout this thread; one of the key components to use when doing any e36 5lug swap properly are the 96+ M3 arms with offset CAB of some variety, and the e36 M3 knuckle/spindle/radträger.
It should be fine once you install those parts from bimmerworldOriginally posted by FredKHowever, in your absence, I will likely sit in your seat buck naked while making racecar noises as if I were maxing your E30 out on the Mulsanne Straight while allowing the perforated vinyl to soak up my butt sweat (going 200 mph does that to you).
My year in Germany
Feedback
Comment
-
yea, its almost sickening. I want to pick up a couple sets 'just in case' in the years to comeOriginally posted by FredKHowever, in your absence, I will likely sit in your seat buck naked while making racecar noises as if I were maxing your E30 out on the Mulsanne Straight while allowing the perforated vinyl to soak up my butt sweat (going 200 mph does that to you).
My year in Germany
Feedback
Comment
-
Wow congrats; you earn a pat on the back! Are you using all stock and easily available non-custom parts to do it?
There are ways to do it using all stock components, thus easier for the rest of us that don't sit on top of a machine shop, and probably cheaper too. I guess the downside is the fact you will be running e36 M3 front brakes; but they still fit under 16" and it's plenty awesome.
In the end, I feel bad for Aptyp who put a ridiculous amount of effort into collecting data to put this topic to rest.Originally posted by FredKHowever, in your absence, I will likely sit in your seat buck naked while making racecar noises as if I were maxing your E30 out on the Mulsanne Straight while allowing the perforated vinyl to soak up my butt sweat (going 200 mph does that to you).
My year in Germany
Feedback
Comment
-
Only custom part was the control arm bushing. Nothing stock or aftermarket worked to my satisfaction, so I designed my own using 3D CAD. My aim was for a bolt-on solution.
Got one set machined up, and they worked perfectly. Got UUC to machine up 10 more, of which I've sold 4.sigpic
BumbleE30 M52 2.8i
Comment
Comment