E30 m3 spindle?

[brent5631]

Anyone know what the e30 m3 spindle diameter is?
Just curious as I couldn't find it anywhere.

[MR 325]

Can you explain in more detail?

[brent5631]

The OD of the spindle? So what the hub slides over. What Is the diameter of it?

[King Mufasa]

I happen to have a e30 m3 strut housing right next to me but dont have any measuring tools at all at my place.

what are you trying to do besides get measurements? Are you trying to custom make one?

[brent5631]

Was just curious if the same kinda thing could be done with the m3 hub as has been done with e36 stuff but without the offset change. By making a sleeve and a different nut.

[SA E30]

Short answer yes...

Only reason I use an e46 hub in my conversion is due to cost, also the change in offset isn't that drastic. E36 disks still need a spacer on the conversion like if you used e30 m3 parts.